Uginox FTE® Laminated Steel
Technical Specifications | |
In accordance with the standard | EN 10088 – 1.4510 |
Density kg/dm³ | 7,86 |
Composition (approximate) % | C≤0.041 – Cr 16.00÷18.00 – Mn≤0.61 – Si≤0.61 + Ti |
Mechanical Properties | |
Tensile strength (approximate) N/mm² | 400÷550 |
Yield strength Rp0.2 N/mm² | ≥240 |
Elongation A80 % | 30 |
Melting point ºC | 1460 |
Magnetisation | Yes |
Finishings | |
Side A | Electrolytic tinning |
Side B | Electrolytic tinning |
Dimensions and packaging | |
COILS | |
Standard width (mm) | 1000 |
Standard thickness (mm) | 0,5 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 or ø400 |
STRAPS | |
Width on request from mm | 10 |
Standard thickness (mm) | 0,5 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 or ø400 |
Weight | coils: 500 or 1000 kg – minicoils: 100 kg each |
SHEETS | |
Standard formats mm | 1000×2000 |
Standard thickness (mm) | 0,5 |
Standard packaging kg | 500 – 1000 |
Specifications |
Formation of a uniform layer of opaque grey colour (patina). |
Prearrangement of the surface in order to facilitate brasing (soft welding). |
Other sizes, finishes and thickness on request.
Ugitop® Laminated Steel
Technical Specifications | |
In accordance with the standard | EN 10088 – ALLOY 1.4301 |
Density g/cm³ | 7,9 |
Composition (approximate) % | C≤0.07 – Cr 18.00÷20.00 – Ni 8.00÷10.50 |
P≤0.045 – S≤0.015 – Mn≤2.00 – Si≤0.75 |
Mechanical Properties | |
Tensile strength (approximate) N/mm² | 540÷750 |
Extension N/mm² | ≥280 |
Elongation at rupture A50 % | 50 |
Melting point ºC | 1460 |
Magnetisation | No |
Finishings | |
Side A | Frosted by roll |
Side B | Frosted by roll |
Dimensions and packaging | |
COILS | |
Standard width (mm) | 1000 |
Standard thickness (mm) | 0,5 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 or ø400 |
STRAPS | |
Width on request from mm | 10 |
Standard thickness (mm) | 0,5 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 or ø400 |
Weight | coils: 500 or 1000 kg – minicoils: 100 kg each |
SHEETS | |
Standard formats mm | 1000×2000 |
Standard thickness (mm) | 0,5 |
Standard packaging kg | 500 – 1000 |
Specifications |
Grinding by means of rolls with rounded corners knurling creates an anti-glare surface. |
Other sizes, finishes and thickness on request.