NATURAL ALUMINIUM ALLOY 1050
| Technical Specifications | |
| In accordance with the standard | EN 485/573 |
| Density g/cm³ | 2,7 |
| Composition (approximate) % | Al 99,5 min – Si≤0,25 – Fe≤0,40 – Cu≤0,05 – Mn≤0,05 |
| Mg≤0,05 -Zn≤0,70 – Ti≤0,05 – others≤0,03 | |
| Mechanical properties H16 physical state | |
| Tensile strength Rm MPa | 120 – 160 |
| Yield strength Rp0,2 MPa | 100 min |
| Minimum elongation A50% | sp. 0,20 ÷ 0,50 ≥1 sp. 0,50 ÷ 1,50 ≥2 sp. 1,50 ÷ 4,00 ≥3 |
| Indicative hardness HBS | 39 |
| Mechanical properties H18 physical state | |
| Tensile strength Rm MPa | 140 min |
| Yield strength Rp0,2 MPa | 120 |
| Minimum elongation A50% | sp. 0,20 ÷ 0,50 ≥1 sp. 0,50 ÷ 1,50 ≥2 sp. 1,50 ÷ 3,00 ≥2 |
| Indicative hardness HBS | 42 |
| Mechanical properties H22 physical state | |
| Tensile strength Rm MPa | 85 – 125 |
| Yield strength Rp0,2 MPa | 55 |
| Minimum elongation A50% | sp. 0,20 ÷ 0,50 ≥4 sp. 0,50 ÷ 1,50 ≥5 sp. 1,50 ÷ 3,00 ≥6 |
| Indicative hardness HBS | 27 |
| Mechanical properties H24 physical state | |
| Tensile strength Rm MPa | 105 – 145 |
| Yield strength Rp0,2 MPa | 75 |
| Minimum elongation A50% | sp. 0,20 ÷ 0,50 ≥3 sp. 0,50 ÷ 1,50 ≥4 sp. 1,50 ÷ 3,00 ≥5 |
| Indicative hardness HBS | 33 |
| Mechanical properties H26 physical state | |
| Tensile strength Rm MPa | 120 – 160 |
| Tensile strength Rp0.2 MPa | 90 |
| Minimum elongation A50% | sp. 0,20 ÷ 0,50 ≥2 sp. 0,50 ÷ 1,50 ≥3 sp. 1,50 ÷ 3,00 ≥4 |
| Indicative hardness HBS | 38 |
| Dimensions and packaging | |
| COILS | |
| Width and formats (mm) | 1000 – 1250 – 1500 |
| Thicknesses (mm) | 0,60 – 0,70 – 0,80 – 1,00 – 1,20 |
| 1,50 – 2,00 – 2,50 – 3,00 | |
| Standard packaging | ø 300 – 400 or 508 |
| STRAPS | |
| Width and formats (mm) | starting from 8 |
| Thicknesses (mm) | 0,60 – 0,70 – 0,80 – 1,00 – 1,00 |
| 1,20 – 1,50 – 2,00 – 2,50 – 3,00 | |
| Standard packaging | ø 300 – 400 or 508 |
| Weight | coils: 500 or 1000 kg – minicoils: 100 kg each |
| SHEETS | |
| Width and formats (mm) | 1000×2000 – 1250×2500 – 1500×3000 |
| Thicknesses (mm) | 0,60 – 0,70 – 0,80 – 1,00 – 1,20 |
| 1,50 – 2,00 – 2,50 – 3,00 | |
| Standard packaging | – |
Other sizes, alloys, finishes and thickness on request.
NATURAL ALUMINIUM ALLOY 3105
| Technical Specifications | |
| In accordance with the standard | EN 485/573 |
| Density g/cm³ | 2,7 |
| Composition (approximate) % | Si≤0,60 – Fe≤0,70 – Cu≤0,30 – Mn0,30÷0,80 – Mg 0,20÷0,80 |
| – Cr≤0,20 – Zn≤0,40 – Ti≤0,10 – others≤0,15 – Al Rest | |
| Mechanical properties H24 physical state | |
| Tensile strength (approximate) N/mm² | >120 |
| Yield strength N/mm² | 150 – 200 |
| Minimum elongation A50% | 4 if sp. < 1,5 mm |
| 5 if sp. > 1,5 mm | |
| Hardness HBW | 47 |
| Mechanical properties H26 physical state | |
| Yield strength N/mm² | >150 |
| Yield strength N/mm² | 175 – 225 |
| Minimum elongation A50% | 3 |
| Hardness HBW | 55 |
| Dimensions and packaging | |
| COILS | |
| Width and formats (mm) | 1000 – 1250 – 1500 |
| Thicknesses (mm) | 0,45 – 0,50 – 0,60 – 0,70 – 0,80 |
| 1,00 – 1,20 – 1,50 – 2,00 – 3,00 | |
| Standard packaging | ø 300 – 400 or 508 |
| STRAPS | |
| Width and formats (mm) | starting from 8 |
| Thicknesses (mm) | 0,45 – 0,50 – 0,60 – 0,70 – 0,80 |
| 1,00 – 1,20 – 1,50 – 2,00 – 3,00 | |
| Standard packaging | ø 300 – 400 or 508 |
| Weight | coils: 500 or 1000 kg – minicoils: 100 kg each |
| SHEETS | |
| Width and formats (mm) | 1000×2000 – 1250×2500 – 1500×3000 |
| Thicknesses (mm) | 0,45 – 0,50 – 0,60 – 0,70 – 0,80 |
| 1,00 – 1,20 – 1,50 – 2,00 – 3,00 | |
| Standard packaging kg | – |
Other sizes, alloys, finishes and thickness on request.
NATURAL ALUMINIUM ALLOY 5754
| Technical Specifications | |
| In accordance with the standard | EN 485/573 |
| Density g/cm³ | 2,7 |
| Composition (approximate) % | Si≤0,40 – Fe≤0,40 – Cu≤0,10 – Mn≤0,50 – Mg 2,60÷3,60 |
| – Cr≤0,30 – Zn≤0,20 – Ti≤0,15 – others≤0,05 | |
| Mechanical properties H111 physical state | |
| Tensile strength (approximate) mm² | 190 – 240 |
| Yield strength N/mm² | >80 |
| Elongation A50 % | 14 |
| Hardness HBW | 52 |
| Dimensions and packaging | |
| COILS | |
| Width and formats (mm) | 1000 – 1250 – 1500 |
| Thicknesses (mm) | 1,00 – 1,20 – 1,50 – 2,00 – 3,00 |
| Standard packaging | ø 300 – 400 or 508 |
| STRAPS | |
| Width and formats (mm) | starting from 8 |
| Thicknesses (mm) | 1,00 – 1,20 – 1,50 – 2,00 – 3,00 |
| Standard packaging | ø 300 – 400 or 508 |
| Weight | coils: 500 or 1000 kg – minicoils: 100 kg each |
| SHEETS | |
| Width and formats (mm) | 1000×2000 – 1250×2500 – 1500×3000 |
| Thicknesses (mm) | 1,00 – 1,20 – 1,50 – 2,00 – 3,00 – 4,00 5,00 – 6,00 – 8,00 |
| Standard packaging | – |
Other sizes, alloys, finishes and thickness on request.
Laminated
Accessories
