PRE-PAINTED ALUMINIUM ALU-SOFT ALLOY 3005
Technical Specifications | |
In accordance with the standard | EN 485/573/1396 |
Density g/cm³ | 2,7 |
Composition (approximate) % | Si≤0.70 – Fe≤0.80 – Cu≤0.30 – Mn 1.00÷1.50 |
Mg 0.20÷0.60 – Cr≤0.10 – Zn≤0.40 – Ti≤0.10 – Others 0.05 each |
Mechanical properties H42 physical state | |
Yield stress N/mm² | 140 ÷ 195 |
Extension N/mm² | ≥95 |
Elongation at rupture A50 % | ≥5 |
Dimensions and packaging | |
COILS | |
Standard width (mm) | 1250 |
Standard thickness (mm) | 0,7 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 or ø400 |
STRAPS | |
Width on request from mm | 10 |
Standard thickness (mm) | 0,7 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 or ø400 |
Weight | coils: 500 o 1000 kg – minicoils: 100 kg each |
SHEETS | |
Standard formats mm | 1250×2500 |
Standard thickness (mm) | 0,7 |
Standard packaging kg | 500 – 1000 |
Other sizes, alloys, finishes and thickness on request.
PRE-PAINTED ALUMINIUM ALU-SOFT PLUS ALLOY 3005
Technical Specifications | |
In accordance with the standard | EN 485/573/1396 |
Density g/cm³ | 2,7 |
Composition (approximate) % | Si≤0.70 – Fe≤0.80 – Cu≤0.30 – Mn 1.00÷1.50 |
Mg 0.20÷0.60 – Cr≤0.10 – Zn≤0.40 – Ti≤0.10 – Others 0.05 each |
Mechanical properties H42 physical state | |
Yield stress N/mm² | 140 ÷ 195 |
Extension N/mm² | ≥95 |
Elongation at rupture A50 % | ≥5 |
Dimensions and packaging | |
COILS | |
Standard width (mm) | 1000 – 1250 |
Standard thickness (mm) | 0,70 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 or ø400 |
STRAPS | |
Width on request from mm | 10 |
Standard thickness (mm) | 0,70 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 or ø400 |
Weight | coils: 500 o 1000 kg – minicoils: 100 kg each |
SHEETS | |
Standard formats mm | 1250×2500 |
Standard thickness (mm) | 0,70 |
Standard packaging kg | 500 – 1000 |
Other sizes, alloys, finishes and thickness on request.
PREPAINTED ALUMINUM IN ALLOY 5005
Technical Specifications | |
In accordance with the standard | EN 485 |
Density g/cm³ | |
Composition (approximate) % | Si0,30 – Fe0,70 – Cu0,20 – Mn0,20 – Mg 0,50÷1,10 |
Cr0,10 – Zn0,25 – Others 0.05 each |
Mechanical properties H42 physical state | |
Yield strength Rm MPa | 80 |
Tensile strength Rp0,2 MPa | 125/165 |
Elongation at rupture A50 %mm | 5 |
Dimensions and packaging | |
COILS | |
Standard width (mm) | 1000 – 1250 – 1500 |
Standard thickness (mm) | 0,60 – 0,70 – 0,80 – 1,00 – 1,20 – 1,50 – 2,00 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 o ø400 |
STRAPS | |
Width on request from mm | 10 |
Standard thickness (mm) | 0,60 – 0,70 – 0,80 – 1,00 – 1,20 – 1,50 – 2,00 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 o ø400 |
Weight | coils: 500 o 1000 kg – minicoils: 100 kg each |
SHEETS | |
Standard formats mm | 1000×2000 – 1250×2500 – 1500×3000 |
Standard thickness (mm) | 0,80 – 1,00 – 1,20 – 1,50 – 2,00 |
Standard packaging kg | 500 – 1000 |
Other sizes, alloys, finishes and thickness on request.
PRE-PAINTED ALUMINIUM ALLOY 5010
Technical Specifications | |
In accordance with the standard | EN 485/573 |
Density g/cm³ | 2,7 |
Composition (approximate) % | Si≤0.30 – Fe≤0.70 – Cu≤0.20 – Mn 0.20 |
Mg 0.50÷1.10 – Cr≤0.10 – Zn≤0.25 – others ≤0.05 each |
Mechanical Properties H44 | |
Yield stress Rm MPa | 130÷170 |
Tensile strength Rp0.2 MPa | 100 |
Minimum elongation A50% mm | 4 |
Mechanical Properties H42 | |
Yield stress Rm MPa | 110÷150 |
Tensile strength Rp0.2 MPa | 90 |
Minimum elongation A50% mm | 6 |
Dimensions and packaging | |
COILS | |
Standard width (mm) | 1000 – 1250 – 1500 |
Standard thickness (mm) | 0.60 – 0.70 – 0.80 – 1.00 – 1.20 – 1.50 – 2.00 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 or ø400 |
STRAPS | |
Width on request from mm | 10 |
Standard thickness (mm) | 0.60 – 0.70 – 0.80 – 1.00 – 1.20 – 1.50 – 2.00 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 or ø400 |
Weight | coils: 500 o 1000 kg – minicoils: 100 kg each |
SHEETS | |
Standard formats mm | 1000×2000 – 1250×2500 – 1500×3000 |
Standard thickness (mm) | 0.80 – 1.00 – 1.20 – 1.50 – 2.00 |
Standard packaging kg | 500 – 1000 |
Other sizes, alloys, finishes and thickness on request.
PRE-PAINTED ALUMINIUM ALLOY 3105
Technical Specifications | |
In accordance with the standard | EN 485/573 |
Density g/cm³ | 2,7 |
Composition (approximate) % | Si≤0.60 – Fe≤0.70 – Cu≤0.30 – Mn 0.30÷0.80 |
Mg 0.20÷0.80 – Cr≤0.20 – Zn≤0.40 – Ti≤0.10 – other ≤0.05 |
Mechanical Properties H44 | |
Tensile strength (approximate) N/mm² | 150÷200 |
Extension N/mm² | 120 |
Elongation at rupture A50 % | 4 |
Hardness | 47 |
Mechanical Properties H42 | |
Tensile strength (approximate) N/mm² | 130÷180 |
Extension N/mm² | ≥105 |
Elongation at rupture A50 % | ≥7 |
Hardness | 41 |
Dimensions and packaging | |
COILS | |
Standard width (mm) | 1000 – 1250 – 1500 |
Standard thickness (mm) | 0.60 – 0.70 – 0.80 – 1.00 – 1.20 – 1.50 – 2.00 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 or ø400 |
STRAPS | |
Width on request from mm | 10 |
Standard thickness (mm) | 0.60 – 0.70 – 0.80 – 1.00 – 1.20 – 1.50 – 2.00 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 or ø400 |
Weight | coils: 500 o 1000 kg – minicoils: 100 kg each |
SHEETS | |
Standard formats mm | 1000×2000 – 1250×2500 – 1500×3000 |
Standard thickness (mm) | 0.80 – 1.00 – 1.20 – 1.50 – 2.00 |
Standard packaging kg | 500 – 1000 |
Other sizes, alloys, finishes and thickness on request.
ALUMINUM PREPAINTED BRONZE ALLOY AW 3105
Technical Specifications | |
In accordance with the standard | EN 1396/573-3 |
Base metal and alloy | 99.5% aluminum – 3105 alloy |
Density g/cm³ | 2,7 |
Composition (approximate) % | Si≤0,60 – Fe≤0,70 – Cu≤0,30 – Mn 0,30-0,80 |
Mg 0,20-0,80 – Cr <0,205 – Zn <0,40 – Ti <0,10 – Others 0.05 each |
Mechanical properties H44 physical state | |
Tensile strength (indicative) N/mm² | 150÷200 |
Elongation N/mm² | 120% |
Fold T max | 0,50 T |
Pencil hardness | H side A / HB side B |
Dimensions and packaging | |
COILS | |
Standard width (mm) | 1000 – 1250 |
Standard thickness (mm) | 0,70 – 0,80 – 1,00 -2,00 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 o ø400 |
STRAPS | |
Width on request from mm | 10 |
Standard thickness (mm) | 0,70 – 0,80 – 1,00 – 2,00 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 o ø400 |
Weight | coils: 500 o 1000 kg – minicoils: 100 kg each |
SHEETS | |
Standard formats mm | 1000×2000 – 1250×2500 |
Standard thickness (mm) | 0,70 – 0,80 – 1,00 – 2,00 |
Standard packaging kg | 500 – 1000 |
Other sizes, alloys, finishes and thickness on request.