Technical Specifications Alloy 5005 | |
In accordance with the standard | EN 573 |
Composition (approximate) % | Si 0,30 – Fe 0,70 – Cu 0,20 – Mn 0,20 |
Mg 0,50-1,10 – Cr 0,10 – Zn 0,25 – others 0,05 each. |
Mechanical properties H42 physical state | |
Tensile strength Rm MPa | 125 / 165 |
Yield strength Rp 0,2 N/mm² | 80 |
Minimum elongation A50% | 5 mm |
Painting cycle | |
Number of faces | 2 |
Paint type side A | polyester |
Thickness side A | 25 +/-5µ |
Paint type side B | polyester |
Thickness side B | 15 +/-5µ |
Dimensions and packaging | |
COILS | |
Standard width (mm) | 1250 – 1350 – 1500 |
Standard thickness (mm) | 0,70 – 0,80 – 1,00 – 1,50 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 or ø400 |
STRAPS | |
Width on request from mm | 8 |
Standard thickness (mm) | 0,70 – 0,80 – 1,00 – 1,50 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Packaging on request | ø300 or ø400 |
Weight | coils: 500 o 1000 kg – minicoils: 100 kg each |
SHEETS | |
Standard formats mm | 1250×2500 – 1500×3000 |
Standard thickness (mm) | 0,70 – 0,80 – 1,00 – 1,50 |
Standard packaging kg | – |
Other sizes and thicknesses on request.