PRE-PAINTED ALUMINIUM ALU-SOFT ALLOY 3005
| Technical Specifications | |
| In accordance with the standard | EN 485/573 |
| Base metal and alloy | – |
| Density g/cm³ | 2,7 |
| Composition (approximate) % | Cu≤0,30 – Mn 1,00÷1,50 Mg 0,20÷0,60 |
| – Cr≤0,10 – Ti≤0,10 – others 0,05 each | |
| Mechanical properties H42 physical state | |
| Tensile strength (approximate) N/mm² | 140 ÷ 195 |
| Yield strength Rp0,2 (N/mm²) | ≥95 |
| Elongation at rupture A50 % | ≥5 |
Only for some colors
| Dimensions and packaging | |
| COILS | |
| Width and formats (mm) | 1250 |
| Thicknesses (mm) | 0,70 |
| Standard packaging | ø 300 – 400 or 508 |
| STRAPS | |
| Width and formats (mm) | starting from 8 |
| Thicknesses (mm) | 0,70 |
| Standard packaging | ø 300 – 400 or 508 |
| Weight | coils: 500 o 1000 kg – minicoils: 100 kg each |
| SHEETS | |
| Width and formats (mm) | 1250×2500 |
| Thicknesses (mm) | 0,70 |
| Standard packaging | – |
Other sizes, alloys, finishes and thickness on request.
PREPAINTED ALUMINUM IN ALLOY 5005
| Technical Specifications | |
| In accordance with the standard | EN 485/573 |
| Base metal and alloy | – |
| Density g/cm³ | 2,7 |
| Composition (approximate) % | Si0,30 – Fe0,70 – Cu0,20 – Mn0,20 – Mg 0,50÷1,10 |
| – Cr0,10 – Zn0,25 – others 0,05 each |
|
| Mechanical properties H42 physical state | |
| Tensile strength Rm MPa | 125/165 |
| Yield strength Rp0,2 NPa | 80 |
| Minimum elongation A50%mm | 5 |
| Dimensions and packaging | |
| COILS | |
| Width and formats (mm) | 1000 – 1250 – 1500 |
| Thicknesses (mm) | 0,60 – 0,70 – 0,80 – 1,00 – 1,20 – 1,50 – 2,00 |
| Standard packaging | ø 300 – 400 or 508 |
| STRAPS | |
| Width and formats (mm) | starting from 8 |
| Thicknesses (mm) | 0,60 – 0,70 – 0,80 – 1,00 – 1,20 – 1,50 – 2,00 |
| Standard packaging | ø 300 – 400 or 508 |
| Weight | coils: 500 o 1000 kg – minicoils: 100 kg each |
| SHEETS | |
| Width and formats (mm) | 1000×2000 – 1250×2500 – 1500×3000 |
| Thicknesses (mm) | 0,60 – 0,70 – 0,80 – 1,00 – 1,20 – 1,50 – 2,00 |
| Standard packaging | – |
Other sizes, alloys, finishes and thickness on request.
PRE-PAINTED ALUMINIUM ALLOY 5010
| Technical Specifications | |
| In accordance with the standard | EN 485/573 |
| Base metal and alloy | – |
| Density g/cm³ | 2,7 |
| Composition (approximate) % | Si≤0,30 – Fe≤0,70 – Cu≤0,20 – Mn 0,20 – Mg 0,50÷1,10 |
| – Cr≤0,10 – Zn≤0,25 – others≤0,05 each | |
| Mechanical Properties H44 | |
| Yield strength Rm MPa | 130÷170 |
| Tensile strength Rp0,2 MPa | 100 |
| Minimum elongation A50%mm | 4 |
| Dimensions and packaging | |
| COILS | |
| Width and formats (mm) | 1000 – 1250 – 1500 |
| Thicknesses (mm) | 0,60 – 0,70 – 0,80 – 1,00 – 1,20 – 1,50 – 2,00 |
| Standard packaging | ø 300 – 400 or 508 |
| STRAPS | |
| Width and formats (mm) | starting from 8 |
| Thicknesses (mm) | 0,60 – 0,70 – 0,80 – 1,00 – 1,20 – 1,50 – 2,00 |
| Standard packaging | ø 300 – 400 or 508 |
| Weight | coils: 500 o 1000 kg – minicoils: 100 kg each |
| SHEETS | |
| Width and formats (mm) | 1000×2000 – 1250×2500 – 1500×3000 |
| Thicknesses (mm) | 0,60 – 0,70 – 0,80 – 1,00 – 1,20 – 1,50 – 2,00 |
| Standard packaging | – |
Other sizes, alloys, finishes and thickness on request.
PRE-PAINTED ALUMINIUM ALLOY 3105
| Technical Specifications | |
| In accordance with the standard | EN 485/573 |
| Base metal and alloy | EN 485/573 |
| Density g/cm³ | 2,7 |
| Composition (approximate) % | Si≤0,60 – Fe≤0,70 – Cu≤0,30 – Mn 0,30÷0,80 – Mg 0,20÷0,80 |
| – Cr≤0,20 – Zn≤0,40 – Ti≤0,10 – others≤0,05 |
|
| Mechanical Properties H44 | |
| Tensile strength (approximate) N/mm² | 150÷200 |
| Yield strength Rp0,2 (N/mm²) | 120 |
| Minimum elongation A50%mm | 4 |
| Hardness | 47 |
| Mechanical Properties H42 | |
| Tensile strength (approximate) N/mm² | 130÷180 |
| Yield strength Rp0,2 (N/mm²) | 105 |
| Minimum elongation A50%mm | 6 |
| Hardness | 41 |
| Dimensions and packaging | |
| COILS | |
| Width and formats (mm) | 1000 – 1250 – 1500 |
| Thicknesses (mm) | 0,60 – 0,70 – 0,80 – 1,00 – 1,20 – 1,50 – 2,00 |
| Standard packaging | ø 300 – 400 or 508 |
| STRAPS | |
| Width and formats (mm) | starting from 8 |
| Thicknesses (mm) | 0,60 – 0,70 – 0,80 – 1,00 – 1,20 – 1,50 – 2,00 |
| Standard packaging | ø 300 – 400 or 508 |
| Weight | coils: 500 o 1000 kg – minicoils: 100 kg each |
| SHEETS | |
| Width and formats (mm) | 1000×2000 – 1250×2500 – 1500×3000 |
| Thicknesses (mm) | 0,60 – 0,70 – 0,80 – 1,00 – 1,20 – 1,50 – 2,00 |
| Standard packaging | – |
Other sizes, alloys, finishes and thickness on request.
Laminated
Accessories
