Laminated Steel DX51D
Hot Galvanised and pre-painted
Technical Specifications | |
In accordance with the standard | UNI EN 10346 |
Density g/cm³ | 7,86 |
Composition (approximate) % | C 0,18 – Mn 1,20 – Si 0,50 |
S 0,045 – P 0,12 – Ti 0,30 |
Paint specifications | |
Paint type | Polyester |
Galvanisation g/m² | 140 – 200 – 275 |
Gloss g.u. | 30÷40 ±5 |
Flaw T | max 1.5 |
Adherence T | max 1.0 |
Resistance to abrasion | mini F |
Mechanical Properties | |
Tensile strength (N/mm²) | 270÷500 |
Elongation A80% min | 22 |
Yield stress Rp0,2 (N/mm²) | – |
Dimensions and packaging | |
COILS | |
Width and formats (mm) | 1000 – 1250 – 1500 |
Thickness (mm) | 0,50 – 0,55 – 0,60 – 0,70 – 0,80 |
1,00 – 1,20 – 1,50 – 1,80 | |
Standard packaging | ø 300 – 400 or 508 |
STRAPS | |
Width and formats (mm) | starting from 8 |
Thickness (mm) | 0,50 – 0,55 – 0,60 – 0,70 – 0,80 |
1,00 – 1,20 – 1,50 – 1,80 | |
Standard packaging | ø 300 – 400 or 508 |
Weight | coils: 500 or 1000 kg – – minicoils: 100 kg each |
SHEETS | |
Width and formats (mm) | 1000×2000 – 1250×2500 – 1500×3000 |
Thickness (mm) | 0,50 – 0,55 – 0,60 – 0,70 – 0,80 |
1,00 – 1,20 – 1,50 – 1,80 | |
Standard packaging | – |
Other sizes, finishes and thickness on request.
Pre-painted HotGalvanised
Laminated Steel DX53D
Technical Specifications | |
In accordance with the standard | EN 10346 |
Density g/cm³ | 7,86 |
Composition (approximate) % | C 0,12 – Mn 0,6 – Si 0,50 |
P 0,10 – S 0,045 – Ti 0,30 |
Paint specifications | |
Paint type | Polyester |
Galvanisation g/m² | 140 – 200 – 275 |
Gloss g.u. | 30 |
Adherence T | ≤2 |
Resistance to abrasion T | ≤3 |
Mechanical Properties | |
Tensile strength (N/mm²) | 270÷380 |
Elongation A80% min | 30 |
Yield stress Rp0,2 (N/mm²) | 140÷260 |
Dimensions and packaging | |
COILS | |
Width and formats (mm) | 1000 – 1250 – 1500 |
Thickness (mm) | 0,50 – 0,55 – 0,80 |
Standard packaging | ø 300 – 400 or 508 |
STRAPS | |
Width and formats (mm) | starting from 8 |
Thickness (mm) | 0,50 – 0,55 – 0,80 |
Standard packaging | ø 300 – 400 or 508 |
Weight | coils: 500 o 1000 kg – minicoils: 100 kg each |
SHEETS | |
Width and formats (mm) | 1000×2000 – 1250×2500 – 1500×3000 |
Thickness (mm) | 0,50 – 0,55 – 0,80 |
Standard packaging | – |
Other sizes, finishes and thickness on request.
Laminated Steel S250GD
Hot Galvanised and pre-painted
Technical Specifications | |
In accordance with the standard | UNI EN 10346 |
Density g/cm³ | 7,86 |
Composition (approximate) % | C 0,20 – Si 0,60 – Mn 1,70 |
P 0,10 – S 0,045 |
Paint specifications | |
Paint type | Polyester |
Galvanisation g/m² | 140 – 200 – 275 |
Gloss g.u. | 30÷40 ±5 |
Flaw T | max 1.5 |
Adherence T | max 1.0 |
Resistance to abrasion | mini F |
Mechanical Properties | |
Tensile strength (N/mm²) | 330 min |
Elongation A80% min | 19 |
Yield stress Rp0,2 (N/mm²) | 250 |
Dimensions and packaging | |
COILS | |
Width and formats (mm) | 1000 – 1250 – 1500 |
Thicknesses (mm) | 0,55 |
Standard packaging | ø 300 – 400 or 508 |
STRAPS | |
Width and formats (mm) | starting from 8 |
Thicknesses (mm) | 0,55 |
Standard packaging | ø 300 – 400 or 508 |
Weight | coils: 500 or 1000 kg – – minicoils: 100 kg each |
SHEETS | |
Width and formats (mm) | 1000×2000 – 1250×2500 – 1500×3000 |
Thicknesses (mm) | 0,55 |
Standard packaging | – |
Other sizes, finishes and thickness on request.
Laminated Steel DX51D
Hot Galvanised Antislip
Technical Specifications | |
In accordance with the standard | UNI EN 10346 |
Density g/cm³ | 7,86 |
Composition (approximate) % | C 0,18 – Mn 1,20 – Si 0,50 |
S 0,045 – P 0,12 – Ti 0,30 |
Paint specifications | |
Paint type | Polyamid (rough) |
Galvanisation g/m² | 150 – 200 – 275 |
Mechanical Properties | |
Tensile strength (N/mm²) | 270÷500 |
Elongation A80% min | 22 |
Dimensions and packaging | |
COILS | |
Width and formats (mm) | 1000 – 1250 – 1340 |
Thickness (mm) | 0,55 – 0,60 – 0,70 – 1,50 – 1,80 |
Standard packaging | ø 300 – 400 or 508 |
STRAPS | |
Width and formats (mm) | starting from 8 |
Thickness (mm) | 0,55 – 0,60 – 0,70 – 1,50 – 1,80 |
Standard packaging | ø 300 – 400 or 508 |
Weight | coils: 500 or 1000 kg – minicoils: 100 kg each |
SHEETS | |
Width and formats (mm) | 1000×2000 – 1250×2500 1500×3000 |
Thickness (mm) | 0,55 – 0,60 – 0,70 – 1,50 – 1,80 |
Standard packaging | – |
Other sizes, finishes and thickness on request.
Laminated Steel Hot Galvanised
and pre-painted HRV
Technical Specifications | |
In accordance with the standard | UNI EN 10346 |
Density g/cm³ | 7,86 |
Composition (approximate) % | C 0,18 – Mn 1,20 – Si 0,50 |
S 0,045 – P 0,12 – Ti 0,30 |
Paint specifications | |
Paint type | Super polyester (rough) |
Galvanisation g/m² | 275 |
Gloss g.u. | 15 ± 10 |
Mechanical Properties | |
Tensile strength (N/mm²) | 270÷500 |
Elongation A80% min | 22 |
Eigentum | |
Resistance to corrosion | RC3 |
RUV class | RUV4 |
Dimensions and packaging | |
COILS | |
Width and formats (mm) | 1000 – 1340 |
Thickness (mm) | 0,55 |
Standard packaging | ø 300 – 400 or 508 |
STRAPS | |
Width and formats (mm) | starting from 8 |
Thickness (mm) | 0,55 |
Standard packaging | ø 300 – 400 or 508 |
Weight | coils: 500 or 1000 kg – – minicoils: 100 kg each |
SHEETS | |
Width and formats (mm) | 1000×2000 |
Thickness (mm) | 0,55 |
Standard packaging | – |
Other sizes, finishes and thickness on request.
Pre-painted steel Coverplus
Technical Specifications | |
In accordance with the standard | UNI EN 10346 |
Density g/cm³ | 7,86 |
Composition (approximate) % maximum |
C 0,12 – Mn 0,60 – Si 0,50 P 0,10 – S 0,045 – Ti 0,30 |
Paint specifications | |
Paint type | Polyurethane |
Galvanisation g/m² | 225 |
Primer side A µ | 25 |
Primer side B µ | 25 |
Thickness of the polyester paint on side A μ | 25 |
Thickness of the polyester paint on side B μ | 25 |
Gloss g.u. | 30 ±5 |
Flaw T | 0 to 1.5 T ECCA |
Adherence T | 0 T ECCA |
Pencil hardness | HB |
Abrasion mg/turn | 30/1000 |
Resistance to salt spray h | 500 |
Umidity resistance h | 1500 |
UV strength + condensation | 2000 h ΔE ≤ 3 |
RB ≥ 80% |
Mechanical properties DX52 | |
Tensile strength (N/mm²) | 270÷420 |
Extension N/mm² | 140÷300 |
Elongation at rupture % | ≥26 |
Mechanical properties DX51 | |
Tensile strength (N/mm²) | 270÷500 |
Extension N/mm² | – |
Elongation at rupture A50 % | ≥22 |
Elongation A80% min | 22 |
Yield stress Rp0,2 (N/mm2) | – |
Dimensions and packaging | |
COILS | |
Width and formats (mm) | 1000 – 1250 |
Thicknesses (mm) | 0,60 – 0,80 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Standard packaging (mm) | ø 300 – 400 or 508 |
STRAPS | |
Width and formats (mm) | starting from 8 |
Thicknesses (mm) | 0,60 – 0,80 |
Standard packaging | coils int. ø 508 mm or 6 mini-coils |
Standard packaging (mm) | ø 300 – 400 or 508 |
Weight | coils: 500 or 1000 kg – minicoils: 100 kg each |
SHEETS | |
Width and formats (mm) | 1000×2000 – 1250×2500 |
Thicknesses (mm) | 0,60 – 0,80 |
Standard packaging (mm) | – |
DURABILITY IN YEARS | |
Rural, urban, normal industrial environment, faint salinity (C2/C3) | up to 20 years |
Heavy industrial environment (C4/C5-I) | up to 15 years |
Environments with high salinity (C4/C5-M) | up to 20 years |
Personalised guarantee | On request, after a technical analysis |
PROPERTY |
Excellent workability of the steel |
Excellent non scratch resistance of the paint |
Excellent resistance against UV rays |
Excellent resistance against industrial agents |
Excellent resistance against corrosion |
Excellent resistance in saline environments |
Colours: Dark brown, White 9002, Grey 7037, Grey 7016 and Silver 9006, other colours on request from the RAL colour chart
Other sizes, finishes and thickness on request.
Copperline Steel line
Technical specifications | |
In accordance with the standard | UNI EN 10346 |
Base metal and alloy | DX 51 |
Density g/cm³ | 7,86 |
Composition (approximate) % | C 0,18 – Mn 1,20 – Si 0,50 |
S 0,045 – P 0,12 – Ti 0,30 |
Paint specifications | |
Paint type | Polyester/Polyamide |
Paint Package | Side A 35 / Side B 15 |
Colour | Side A antiqued copper / Side B matching back |
Galvanisation g/m² | 100 – 140 – 200 – 275 |
Hardness | DX 51 |
Mechanical properties | |
Tensile strength (approximate) (N/mm²) | 270÷500 |
Yield strength | – |
Elongation at rupture A% | A80%≥ 22 |
Hardness | – |
Dimensions and packaging | |
COILS | |
Width and formats (mm) | 1000 – 1250 |
Thicknesses (mm) | 0,55 – 0,80 – 1,50 |
Standard packaging | ø 300 – 400 or 508 |
STRAPS | |
Width and formats (mm) | starting from 8 |
Thicknesses (mm) | 0,55 – 0,80 – 1,50 |
Standard packaging | ø 300 – 400 or 508 |
Weight | coils: 500 o 1000 kg – minicoils: 100 kg cad. |
SHEETS | |
Width and formats (mm) | 1000×2000 – 1250×2500 |
Thicknesses (mm) | 0,55 – 0,80 – 1,50 |
Standard packaging | – |
Other measurements, finishes, and thicknesses upon request.